|
Precision Engineered Valves
| We deal in a huge array of valves that are precision engineered to provide accurate performance in all circumstances. These valves are offered in various design specifications, tensile strengths, material and other features. All the models available are approved by IBR, CMRS and other related standard. |
 
Gate Valves Features:- Cast Gate Vavle O.S. & Y Bolted Bonnet, Flanged End
- Material of construction: Cast Carbon Steel, CF 8, CF 8 M
- MFg Stds: BS 1414/ API 600 / ANSI B 16.34
- FACE to FACE: AS per ANSI B 16.10
- Ends Flanged & Drilled as per ANSI B 16.5 R.F.
- Tested As Per BS 5146 / API 598
Size Range:
• ASA 150 # - 40 mm to 500 mm
• ASA 300 # - 40 mm to 300 mm
• ASA 600 # - 40 mm to 200 mm |
|
Ask for Quote  
Sugar Valves Features:
(Valves Equivalent to model 3012, 3013 etc)
- Types: Poppet type, Mid-locking & Direction Control valve
- Material of construction: Aluminum / Brass / SS-304 / SS316
- Media: Air / Gases / Liquid / Vacuum / Haz Chemicals.
- Weather Proof as per IP-67.
- Flame Proof as Per IS 2148-1981.
- Duly Approved by CMRS Dhanbad & COE Nagpur.
Our Sugar Solenoid valves are widely used in all sugar industries. |
|
Ask for Quote
Y Type Angle Valve Features:Investment casted body.Actuator of this valve is pneumatic cylinder type with pressed stainless steel.Size of valves ranges from ½” to 3” BSP with 2 way and 3 way.
Applications:- ‘Y’ type (Angled) Pneumatic Valves for process control application.
- These valves are used for on-off application to control steam, water, coolants, air, gas, and light oil at line pressure up to 10 bar.
- Used in textile dyeing machinery’s, textile dyeing mills, air-drying equipment's, autoclaves, pharmaceutical machinery, automobile industry and automatic process control applications.
|
|
Ask for Quote
Butterfly Valve Features:- Integrally moulded inside.
- Light weight and cost effective substitute.
- Primary and secondary seals integral with body fittings.
- Different disc & seat combination available on request.
- Size Range: 50 mm to 600 mm.
- Availability: Ex-Stock / 1-2 weeks (Max 100 Nos)
|
|
Ask for Quote
Ball Valves Features- Ball valves with zero leak gland.
- Slotted PTFE seats.
- Material of constructions: CF8, CF8M, ASTM A 216 WCB, CN7M, Hast-B, Hast-C.
- Blow out proof /Heavy Duty stem
- Temperature: 20 deg to 210 deg.
- End Connections: Flanged End / Screwed End / Socket Weld / BSP / NPT /Triclover End.
- 100% PTFE seat.
- Down stem sealing and floating ball.
- Extra long handle.
- SS 304 / SS 316 Ball.
- Class: 150#/300#/800#
- Low Torque. * Mfg Stand: BS 5351.
|
|
Ask for Quote
Knife Edge Gate Valves Features- Body: CI, CS, CF8, CF8M, Hast ‘C’ Solid 1 Pc casting.
- Outer Chest: CI, SS lined internals.
- Gate: M.S., SS 304, SS 316, Hast ‘C’
- Design: Square, Lugged, Luggless
- Pressure: 150 Psi
- Temp: 300 Deg Cent
- Sizes: 2”(50NB) to 20 “(400NB)
- Manual & Pneumatically operated
- Further automation with Positioner can be given to operate the valve on to signal of 4-20 mamps.
|
|
Ask for Quote
Cast Steel Stainers Features- Body & cover point male-female bolted cover.
- Leak-proof.
- Encased body-cover point gasket.
- Size Range: 50 NB to 300 NB
- Material of construction: Cast Carbon Steel(WCB), Alloy Steel, CF 8 (SS 304), CF 8 M (SS 316)
- IBR Approved
|
|
Ask for Quote
Forged Check Valves We offers Forged Steel Globe, Gate & Lift Check Valves with following features.
Features:- Bolted bonnet out side screw and yoke construction.
- Stem of 13% cr steel, heat treated and fine finish to avoid damage of packing.
- Body Gasket is fully encapsulated that eliminate the chance of direct line pressure or leakage of body bonnet.
- Testing Medium: Water and Air
|
|
Ask for Quote
|
Product Showcase
View all our products / services as a slide show.
Play Now
 
|
Copyright © FluidTecq Pneumatics (P) Ltd, All Rights Reserved (Terms of Use)
